[Cura Tutorial] Advanced Settings Course

New versions of Cura are constantly emerging, with over 200 adjustable settings. Do you fully understand all the settings in Cura?
Most users, like the editor, probably only use a few basic parameters such as layer height, infill, and speed.
Therefore, 3DMART has specially compiled several key settings that you might not normally use,
but which can improve the quality of your prints or make your usage more convenient.
The most important thing is that it's "completely free"! This offer is for customers who purchase printing equipment from 3DMART!
This is a rare opportunity, and spots are limited. Click the registration page now to seize the chance to enhance your 3D printing skills!

Course Title: Cura Advanced Settings Tutorial
Target Audience: Customers who use Cura as their slicing software
Course Dates: First Session: 2017.09.18 (Monday); Second Session: 2017.10.16 (Monday)
Course Time: 15:00-16:30
Number of Sessions/Hours: 1 session / 90 min
Course Location: 3DMART Taipei Headquarters
Training Fee:
First session is completely free for customers who purchased equipment from 3DMART;
Second session is open for registration at NT$1,800 per person.
 
【Registration Link】
https://drive.google.com/open?id=15Ub5K68XXlcuo8qF0n_-DEA77gYOe3B5k0z2TnIWwi4
 
【Course Outline】
Introduction to Cura's basic interface, dual-color printing operations, automatic pause for material or parameter changes, infill methods, adjusting tolerances, improving surface quality, repairing file errors, and special modes and case studies.
【Course Content】

1. Dual-color printing
2. Automatically change parameters or pause for material change at a certain layer
3. Infill between walls
4. Horizontal expansion
5. Z Seam Alignment
6. Z-Hop
7. Avoid printed parts
8. Fan cooling
9. Support horizontal expansion
10. Overlap integration
11. Remove holes in objects
12. Extensive stitching
13. Special modes
14. Experimental modes

【Instructor】 

Mr. Zhang Shao-gang, Sales Engineer at 3DMART

【Target Audience】

Customers who use Cura as their 3D printing slicing software
 
【Number of Participants】

10 people (limited to 1 person per company)

【How to Register】

Fill out the form below
https://drive.google.com/open?id=15Ub5K68XXlcuo8qF0n_-DEA77gYOe3B5k0z2TnIWwi4

【Related Regulations】

Our company reserves the right to change courses and adjust schedules. If there are any changes to the course or schedule, we will notify participants in advance.

【Contact Information】
 
3DMART Co., Ltd.

Address: 9F-5, No. 1, Baosheng Road, Yonghe District, New Taipei City
Phone: (02) 22316389
E-mail: client@3dmart.com.tw
Website: https://3dmart.com.tw/