Do you remember that in a previous article, we introduced you to the basic operation of a 3D scanner and tested scanning small objects and busts?
If not, no worries! Let's go back and review the article!
This time, we're going to show you how to use a 3D scanner to scan large objects. We're using the EinScan 3D scanner from Shining 3D.
We used a front fairing from a scooter, which we got from a nearby scooter repair shop. Its shape is like a cool mask, making it a very suitable object for 3D scanning!
Let's take a look at the scooter fairing we're going to scan! It's a striking royal blue with a cool design~
The first step is to spray the object with powder. Just like women need to put on makeup (powder) to be noticed when they go out, spraying powder can make the scanning process smoother,
helping the scanner to grasp the shape of the object more quickly. (Note: Not all objects need powder. Objects that are reflective or black usually require powder; for other objects, you can scan first and then decide.)
Point the scanner at the front of the fairing. You can use a tripod to elevate the scanner for an easier scanning process. Remember to adjust the angle of the fairing to ensure a more complete scanned file.
You can see that the scanner's automatic calibration technology is excellent. In less than a minute, the front shape almost completely captures the stylish, streamlined design of the scooter fairing.
After scanning the front of the fairing, turn it to the back and continue. Again, the first step is to apply powder.
The back has more detailed parts, so it takes a little longer to scan than the front, but the details can be rendered very precisely. After scanning, it still needs some fine-tuning in 3D software to ensure better quality when printing later.
Finally, the finished 3D scan after detailed adjustments by the engineer.
We will also publish articles later about printing a scaled-down version of the scooter fairing using this scanned 3D file.
We will continue to publish more articles related to scanning, so please stay tuned for our latest updates.
Special thanks to the San Yang scooter shop near 3DMart for generously providing the stylish royal blue steering wheel fairing.
Please look forward to the birth of our 3D printed scooter fairing!