【3D Scanning Tutorial】REVOPOINT 3D Scanner: Automatic Exposure for Fast and Fine Scans!
A complete tutorial for the REVOPOINT POP 2 3D scanner, including software operation and actual results. With a fixed tripod, dedicated turntable, and handheld mobile phone mode, you are not limited by cable length and can perform 3D scanning anytime, anywhere. Watch the unboxing and tutorial now:
1. Contents of the box
2. Tripod
3. Dedicated scanning turntable
4. Phone holder
5. Power bank
6. Sample scan model - David bust
7. Connection cables
2. Tripod-mounted 3D Scanning
Accessories: Tripod / Scanner / Turntable / Computer software
Use the tripod to fix the scanner and the turntable for 3D scanning. Before starting the scan, the system will automatically detect and suggest the optimal object placement.
1. Click on the "Automatic Exposure" function for fast and accurate 3D scanning.
2. Click "New Scan" to set scanning preferences based on precision and object type.
Scanning Precision: Fast mode / High precision
Scanning Mode: Feature alignment / Marker alignment / Deep black objects / Face / Head and hair / Body
Texture Mapping: White model / Color model
Set the countdown seconds, then start scanning. During the scanning process, "green" in the software indicates successful imaging (David model size 5 x 5 x 9 cm). After completing the scan, click "End" to stop scanning.
During the process, you can adjust the object's placement angle as needed and repeat the scanning steps above to capture more comprehensive details. Afterward, click on "Structural Parameters" and check "Fill Holes" to automatically fill holes in the model (total 3D scanning time: 5 minutes); click "Color Preview" to instantly switch the object's original color. After the 3D scan is complete, the file can be directly imported into Ultimaker Cura slicing software for direct 3D printing. (Or perform other post-processing as needed)
3. Handheld / Mobile-assisted 3D Scanning
Accessories: Scanner / Power bank handle / Holder / Mobile software
Assembling the Handheld 3D Scanning Grip
1. Attach the phone holder to the power bank handle.
2. Attach the 3D scanner to the top of the holder (or directly fix the scanner to the tripod).
3. Insert the 2-in-1 data cable into the back of the scanner and tighten it.
4. Insert the USB connector into the output port.
Using the handheld scanning mode with a mobile phone allows for real-time preview of the results. The power bank handle below can be directly connected to the 3D scanner and phone, eliminating limitations from cable length, enabling 3D scanning anytime, anywhere. (Iron Man scan total time: 10 minutes)
Follow our Facebook page for updates: https://www.facebook.com/3dmart.com.tw/