BuildTak 3D Print Surface
Are you still worried about warping? Or what to do if your 3D printer doesn't have a heated bed? Don't worry, because the world-renowned powerful 3D print surface is now available~!
Features:
1. Designed for FFF (Fused Filament Fabrication) 3D printers, this print surface allows objects printed with ABS, PLA, HIPS, Co-Polyesters, stone-like, wood-like & flexible (TPE) 3D printer filaments to adhere well without warping; you can also apply a thin layer of glue stick for Nylon and t-glase (PETT) filaments to adhere to.
2. Easier to apply and less prone to bubbles than regular blue tape.
3. Protects the print bed.
4. Heat-resistant and durable, can be reused continuously and does not need to be replaced with different print materials.
5. Creates optimal adhesion between the print bed and the printed object during printing, but does not easily attract dust, and printed objects are easy to remove.
3DMART offers three sizes of print surfaces for you to choose from!
165mm x 165mm
Diameter 165mm
203mm x203mm
Plus, clear and simple installation instructions to get you set up in three minutes!
Five steps to install, quick and convenient:
Step 1: Check if the print bed is clean and free of debris. You can wipe it with 70% alcohol first.
Step 2: Peel off the white backing tape from the BuildTak.
Step 3: Align the BuildTak with the edge of the print bed and apply it.
Step 4: Apply the rest of the sticker, using a hard card like a credit card to help adhere and scrape away air bubbles.
Step 5: Re-level the print bed.
BuildTak 3D Print Surface - an absolute must-have for 3D printers without a heated bed, and even better for those with one!